+86-573-8818-8758

Softener classification

May 30, 2022

With the development of dyeing and finishing industry, various softeners appeared one after another. In general, according to the chemical composition of softeners, they can be divided into four categories: non-surface active, surfactant, reactive and polymer emulsion.

non-surface active

Early non-surface-active softeners were mainly mineral oil, paraffin, and natural oils. The higher fatty alcohols, higher fatty acids and higher fatty acid esters have good softness and high-speed smoothness, and can also be used as raw materials for softeners. Softener 101 falls into this category.

Surfactant

Most softeners fall into this category. Among them, the cationic softener is suitable for the finishing of cellulose fibers and synthetic fibers, and is a widely used category.

(1) Anionic softener

Anionic softeners were used earlier, usually sulfate or sulfonate compounds. For example, sulfates of vegetable oils, fatty acid sulfates or sulfates, succinate sulfonates, and the like. Anionic softener has good wettability and thermal stability, and can be used in the same bath with fluorescent whitening agent. It has a unique smooth feel when combined with non-ionics for bleached fabrics. The representative variety is dioctadecyl succinate sulfonate, trade name softener MA-700. Since fibers are negatively charged in water, such softeners are not easily adsorbed by fibers, resulting in weak softening effect and sensitivity to electrolytes, usually used for cotton, viscose, silk, etc.

(2) Non-ionic softener

Such softeners have good compatibility, are stable to electrolytes, and have no yellowing shortcomings, but they have poor adsorption to fibers and low durability. Mainly used in cellulose fiber finishing and synthetic fiber oil.

Fatty acid polyol ester. Pentaerythritol fatty acid esters, glycerol monofatty acid esters and sorbitan fatty acid esters are the main varieties of polyol type nonionic softeners. This kind of softener has an excellent effect on reducing the static friction coefficient of fibers, and is a general-purpose softener, which is widely used in synthetic fiber spinning oils.

Alkanolamides and polyoxyethylene fatty amides

Fatty acid diethanolamide has good foam stabilization and smoothing effect in solution, and can be used as softener.

polyether

Polyether softener has excellent high temperature resistance, especially suitable for high speed, high temperature, high pressure and other occasions.

(3) Cationic softener

The cationic softener has strong binding ability with various fibers, which can make the fabric obtain excellent softening effect, strong durability, washing resistance, and can improve the antistatic effect, abrasion resistance and tear strength of the fabric. The disadvantage is that it has yellowing phenomenon, has inhibitory effect on fluorescent whitening agents, and has a certain irritating effect on the human body. Cationic softeners are widely used and have many varieties.

Quaternary ammonium salts. This is the most important cationic softener. It is cationic in any medium and has a good softening effect. It can be used for all kinds of fibers. It is not suitable for the softening of bleached and extra white fabrics. This type of softener is developing rapidly.


Send Inquiry